![Auline 21700 40T 4000mAh 6S 35A 22.2V Li-ion Battery XT60 [DG]](http://my.fpvfaster.com/cdn/shop/files/1_43a5bc61-5c71-4c1e-9f7c-fbcd7f2fcccc_300x300.jpg?v=1705964615)
GEPRC TAKER F722 BLS 65A V2 Stack 30.5x30.5mm
Features
- Uses the mainstream STM32F722 chip
- Equipped with the latest 42688-P gyroscope
- 16M onboard black box storage
- Integrated LC filter
- Upgraded Type-C USB interface
- Directly plugs into the DJI Air Unit
- Paired with the TAKER H65_8S_BLS 65A 4IN1 ESC, providing a smooth flying experience
- Simple and efficient installation method with shock absorbers for stable gyroscope performance
- Dual independent BECs: 9V@2.5A and 5V@3A
Specifications
GEP-F722-HD v2 Flight Controller
- MCU: STM32F722
- IMU: ICM42688-P(SPI)
- Air Unit Connection: Direct plug-in to DJI Air Unit
- Black Box:16M onboard
- USB Interface: Type-C
- Barometer: supported
- OSD: BetaFlight OSD w/ AT7456E chip
- BEC: 5V@3A,9V@2.5A dual BEC
- Firmware Target: GEPRCF722
- Dimension: 36.85×36.85mm, mounting hole size 30.5×30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.
- Input Voltage: 3-6S LiPo
- UART: 5
- Power Filter: Integrated LC filter
- Weight: 8.1g
TAKER H65_8S_BLS 65A 4IN1 ESC
- Input Voltage: 3-8S Lipo
- Ammeter: Supported
- Continuous Current：65A
- Burst Current：70A（5 seconds）
- Support Protocol: Dshot 150/300/600
- Dimension：42×45.7mm,mounting hole size30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.
- Weight: 14.9g
- Firmware Target: B_X_30
Includes
- 1 x FC board
- 1 x ESC board
- 1 x Capacitor
- 1 x DJI Air Unit adapter cable
- 1 x Flight controller adapter cable
- 1 x XT60 power cable
- 4 x M3*30 screws
- 4 x M3*25 screws
- 8 x Nylon nuts
- 8 x Silicone anti-shake pads
- 2 x sh1.0 4pin silicone cable
- 1 x Camera connection cable
![Infinity 1400mAh 6S 150C 22.2V LiPo Battery XT60 [DG]](http://my.fpvfaster.com/cdn/shop/files/Xnip2024-07-30_14-30-56_600x600.jpg?v=1722313885)
