NewBeeDrone AcroBee65 BLV4 TinyWhoop

RM731.00 MYR

Quantity

Featured Products

RadioMaster Bandit BR3 ExpressLRS 915MHz ELRS TCXO Receiver

RM117.00 MYR

RadioMaster TX16S Mark II Max Radio Controller Transmitter

RM1,231.00 MYR

RadioMaster Bandit Nano ExpressLRS 915MHz RF ELRS 1W Module TX

RM187.00 MYR RM233.00 MYR

DOGCOM 5200mAh 6S 120C 22.2V LiPo Battery QS8 [DG]

RM542.00 MYR

ISDT K2 Air Dual Channel Smart Charger 2-6S AC DC 200w 500w 20A

RM623.00 MYR RM704.00 MYR

TBS Crossfire Micro TX V2 Starter Set

RM501.00 MYR

NewBeeDrone AcroBee65 BLV4 TinyWhoop BNF ELRS

Specifications:

Flight Controller： BeeBrain BLv4 ELRS
MCU: STM32F411
VTX: Switchable output power from 5mw- 25mw(for Racing) - SmartMAX(SmartMax up to 400mw) with BeeTX 5.8Ghz Antenna
ESC: 12A BLHeliS Pre-Flash with Bluejay 0.16 target: S-H-40 48kHz
ESC Connector: JST-1.0 3Pin
OSD: NBD7456 Graphical OSD compatible with Betaflight OSD
Receiver: ELRS2.4 Diversity receiver(ESP32 compatible with wifi&bluetooth firmware update) 2.4G T-Antenna(Top) & normal 2.4G antenna(bottom)
Flight Controller Weight: 6.5g(Include antennas and battery connector)
Flight Controller Size: Outer dimensions: 29x29x7.6mm
Flight Controller Holes: 25.5x25.5mm
Battery input: 1-2S
Uart2: Tx&Rx for ExpressLRS2.4G Receiver
Uart1: Tx&Rx free
Power Connector: NBD-PH2.0 connector
Motors: Flow 0802 19000kv
Frame: Cockroach65 Brushless Frame Clear Purple
Camera Mount: Goober Canopy Clear Purple
Propeller: Azi Tri-blade 31mm 1.0 Clear Purple

Firmware:

All firmware can be found on our Github Page

Note:

Binding process. power up the drone 3 times, on the third time you plug in power, the ELRS Receiver will get into binding mode. We are still trying to work on the ELRS firmware and make it able to just click the boot button to get into bind mode. Will get this update in the near future.